Dr. Anuj  Kumar Shukla

Department Mechanical Engineering
Designation Assistant Professor
Educational Qualification Ph.D. (IIT Delhi), M.Tech (Engg. Mech., IIT Delhi), B.Tech (Mech. Engg.)
E-Mail akshukla.me@nitrr.ac.in
Contact Number 09136271032
Areas of Interest

Dr. Anuj Kumar Shukla

Ph.D. IIT Delhi, M.Tech (Engg. Mech., IIT Delhi), B.Tech (Mech. Engg.)

Assistant Professor, Department of Mechanical Engineering, NIT Raipur

CEO (Intrim) NIT Raipur Foundation for Innovation Entrepreneurship (NITRRFIE)

Faculty-in-Charge for Establishment of Incubation Centre, NIT Raipur

Member, National and Industrial Collaboration Cell, NIT Raipur

 

Research Interests

Dr. Shukla's research interests are Computational Fluid Dynamics (CFD), Convective Heat Transfer, Thermal Engineering, Turbulence Modelling, Simulation, RANS, LES, Heat Exchanger Simulation, Thermal Management of EV Batteries, Filtration, and Clean Air.

CFD is an important area of research that helps to understand the behavior of fluids, such as air and water, in motion. Convective Heat Transfer is the study of how heat is transferred through fluids in motion. Thermal Engineering is the application of thermodynamics to the design and operation of devices and systems that involve the transfer of heat. Turbulence Modelling is the study of the chaotic behavior of fluids in motion. Dr. Shukla's expertise in simulation techniques, including RANS and LES, enables him to predict and analyze the behavior of fluids in various industrial applications. Heat Exchanger Simulation is another area of interest for Dr. Shukla, where he focuses on designing and analyzing heat exchangers for various industrial applications. Thermal Management of EV Batteries is an important area of research, where Dr. Shukla aims to develop effective thermal management systems for electric vehicles to ensure optimum battery performance and longevity. Filtration and Clean Air are also areas of interest for Dr. Shukla, where he aims to develop effective filtration systems and technologies to improve indoor air quality and reduce air pollution.

Through his research interests, Dr. Shukla aims to contribute to the development of sustainable and efficient technologies that can benefit society and the environment.

Brief Bio: 

Welcome to the personal website of Dr. Shukla, an Assistant Professor at the Department of Mechanical Engineering at NIT Raipur. In addition to his teaching responsibilities, Dr. Shukla also takes care of various administrative responsibilities at NIT Raipur, such as the Faculty-in-Charge for Establishment of Incubation Centre and Member of the National and Industrial Collaboration Cell.

Dr. Shukla is currently serving as the (Intrim) Chief Executive Officer of NIT Raipur Foundation for Innovation Entrepreneurship (NITRRFIE), a Section-8 not-for-profit company of NIT Raipur, where he aims to support the Atmnirbhar Bharat Mission.

Before joining NIT Raipur, Dr. Shukla worked as a Scientist at Elofic Industries Limited in Faridabad. As a scientist, he developed several research-based products such as Clean Air Tower, Nasal filter, and Oxygen Concentrator. His areas of specialization include CFD, Convective Heat Transfer, Fluid Dynamics, Thermal Simulations, Turbulence Modelling, Clean Air, and Filtration.

Dr. Shukla has participated in various scientific and international meetings and events, including a BRICS Youth Summit in South Africa where he was part of the Indian delegation. During the summit, he debated and delivered a speech on Industry 4.0 on behalf of India in the presence of the South African Science and Technology Minister and other BRICS representatives.

Dr. Shukla is the recipient of several awards, including a letter of appreciation from the Hon'ble Governor of Nagaland for his efforts in social entrepreneurship. He has also published several research papers and patents.

Dr. Shukla has a strong vision towards Startup India, Incubation Management, Make in India, and Make for World by developing a strong link between Industry-Academia Collaboration.

Thank you for visiting Dr. Shukla's personal website. Please feel free to explore more about his research work and accomplishments.

Publications

PUBLICATIONS

Selected Articles in Top International Journals

  • Arya, D., Shukla, A. K., & Netam, N. (2025). Investigation of Complex Melting Dynamics of Phase Change Material in Inclined Enclosures with Asymmetrical Fins. Energy Technology. Advanced online publication. https://doi.org/10.1002/ente.202501545
  • Shukla, S., Singh, D., Maurya, A., Manocha, C., Sharma, S., Kumar, V., Kadi, N., Koul, K., Shukla, A. K., Kulachenko, A., & Rawal, A. (2026). Machine learning-driven strategies for optimal design of heating, ventilation, and air-conditioning (HVAC) filter media. Separation and Purification Technology, 380(Part 2), 134973. https://doi.org/10.1016/j.seppur.2025.134973
  • Dewangan, A., & Shukla, A. K. (2024). Enhancing Li-ion EV Battery Performance: Analysis of Advanced Thermal Management Cooling Strategies with PCM. Energy Technology. https://doi.org/10.1002/ente.202301665
  • Babu, D., Shukla, A. K., Gaba, V. K., & Dewan, A. (2024). Thermal Performance of Solar Flat Plate Collector Using Energy Storage Phase Change Materials. Energy Storage, 6(1). https://doi.org/10.1002/est2.577
  • Dewangan, C., Shukla, A. K., Salhotra, R., & Dewan, A. (2024). Analysis of an Earth-to-Air Heat Exchanger for Enhanced Residential Thermal Comfort. Environmental Progress & Sustainable Energy (AiChE Journal). https://doi.org/10.1002/ep.14346
  • Shukla, A. K., Kumar, A., Kumar, R., & Ranjan, P. (2023). Investigation of pleated air filters: Effects of Various Shapes and Design Parameters on Flow Patterns and Pressure Drop. International Journal on Interactive Design and Manufacturing (IJIDeM). https://doi.org/10.1007/s12008-023-01523-1
  • Mehul, B., Ranjan, P., & Shukla, A. K. (2023). Numerical Investigation on Effect of Spark Plug Configurations on Performance in an Engine Cylinder. FME Transactions. doi: 10.5937/fme2304585M
  • Singh, T. P., Dewan, A., & Shukla, A. K. (2023). Heat transfer enhancement in turbulent dual jet and its thermal characterizations using large eddy simulation. International Journal of Thermal Sciences, 192(Part B), 108436. https://doi.org/10.1016/j.ijthermalsci.2023.108436
  • Arunachalam, D., Shukla, A. K., Dewan, A., Salhotra, R., & Singh, D. K. (2023). Computation of thermal properties of CMSP shell and tube heat exchanger using different types of helical baffles. Heat Transfer. https://doi.org/10.1002/htj.22882
  • Arunachalam, D., Shukla, A. K., Dewan, A., Salhotra, R., & Singh, D. K. (2023). Thermal Performance and Turbulence Modelling of Combined Multiple Shell-Pass Shell and Tube Heat Exchanger. ASME Journal of Thermal Science and Engineering Applications, 15(7), Article 071006. https://doi.org/10.1115/1.4062240
  • Shukla, A. K., Dewan, A., Singh, D. K., & Singh, T. P. (2023). Heat Transfer Characteristics of Jet Impingement on a Surface Mounted with Ribs using LES. International Journal of Thermal Sciences, 187, Article 108210. https://doi.org/10.1016/j.ijthermalsci.2023.108210
  • Pithani, M. B., Sanyal, S., & Shukla, A. K. (2023). Bilinear and Bicubic Interpolations for Image Presentation of Mechanical Stress and Temperature Distribution. Power Engineering and Engineering Thermophysics, 1(1), 8–18. https://doi.org/10.56578/peet010103
  • Shukla, A. K., Kou, K., & Babu, B. (2022). Study of modern air purification and sterilization techniques. Environmental and Earth Sciences Research Journal, 9(3), 79–89. https://doi.org/10.18280/eesrj.090301
  • Pal, S., Shukla, A. K., & Sanyal, S. (2023). Modified secant method for reduction in number of iterations. Mathematical Modelling of Engineering Problems, 10(1), 376–382. https://doi.org/10.18280/mmep.100144
  • Shukla, A. K., & Dewan, A. (2021). Computational Analysis of Convective Heat Transfer Properties of Turbulent Slot Jet Impingement. Engineering Computations, 38, 3785–3808. https://doi.org/10.1108/EC-08-2020-0483
  • Tanveer, S., Dewan, A., Sanghi, S., & Shukla, A. K. (2020). Stability Analysis of Cross Buoyancy Flow Past a Circular Cylinder Using OpenFOAM. Materials Today: Proceedings, 28(Part 4), 2057–2061. https://doi.org/10.1016/j.matpr.2020.02.724
  • Shukla, A. K., & Dewan, A. (2019). Flow and Thermal Characteristics of Jet Impingement on a Flat Plate for Small Nozzle to Plate Spacing using LES. International Journal of Thermal Sciences, 145, 1–17. https://doi.org/10.1016/j.ijthermalsci.2019.106005
  • Shukla, A. K., & Dewan, A. (2018). OpenFOAM Based LES of Slot Jet Impingement Heat Transfer at Low Nozzle to Plate Spacing using Four SGS Models. Heat and Mass Transfer, 55(3), 911–931. https://doi.org/10.1007/s00231-018-2470-8
  • Shukla, A. K., & Dewan, A. (2018). Heat Transfer and Flow Characteristics of Turbulent Slot Jet Impingement on Plane and Ribbed Surfaces. Thermophysics and Aeromechanics, 25(5), 717–734. https://doi.org/10.1134/S0869864318050086
  • Shukla, A. K., & Dewan, A. (2017). Flow and Thermal Characteristics of Jet Impingement: Comprehensive Review. International Journal of Heat and Technology, 35(1), 153–166. DOI: 10.18280/ijht.350121
  • Shukla, A. K., & Dewan, A. (2017). Convective Heat Transfer Enhancement using Slot Jet Impingement on a Detached Rib Surface. Journal of Applied Fluid Mechanics, 10(6), 1615–1627. DOI: 10.18869/acadpub.jafm.73.243.27685
  • Shukla, A. K., & Dewan, A. (2016). Computational Study on Effects of Rib Height and Thickness on Heat Transfer Enhancement in a Rib Roughened Square Channel. Sadhana - Academy Proceedings in Engineering Sciences, 41(6), 667–678. https://doi.org/10.1007/s12046-016-0501-z

 

Refereed International Journals and Conference Proceedings

  • Shukla, A. K., & Dewan, A. (2019). Study of convective heat transfer in turbulent jet impingement using SAS and LES modelling. AIP Conference Proceedings, 2148(1), 020001. https://doi.org/10.1063/1.5123922

  • Shukla, A. K., Dewan, A., & Srinivasan, B. (2016). Computational Study of Turbulent Slot Jet Impingement on a Ribbed Surface. In Proc. 6th International and 43rd International Conference on Fluid Mechanics and Fluid Power. MNNIT Allahabad.

  • Shukla, A. K., & Dewan, A. (2015). Computational Study of Heat Transfer Enhancement through Broken and Continuous Attached Ribs in a Square Channel. In Proc. 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference. Trivandrum, India.

  • Shukla, A. K., & Dewan, A. (2017). Slot Jet Impingement Heat Transfer on Flat and Ribbed Surfaces for High Nozzle to Plate Spacing. In Proc. 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (pp. 337–344). BITS Pilani, Hyderabad, Indian Society for Heat and Mass Transfer digital library. DOI:10.1615/IHMTC-2017.460

  • Shukla, A. K., & Dewan, A. (2018). Computation of Thermophysical Properties of Jet Impingement Heat Transfer. In IMECE International Mechanical Engineering Congress & Exposition. David L. Lawrence Convention Center, Pittsburgh, PA, USA.

  • Shukla, A. K., & Dewan, A. (2019). Computational Study of Flow and Thermal Characteristics of Turbulence Slot Jet Impingement on a Heated Plate. In 4th Thermal and Fluids Engineering Conference (TFEC 2049). Westin Hotel, Las Vegas, NV, USA.

  • Shukla, A. K., Babu, D., & Dubey, S. (2024). Industrial Air Purifiers: CFD Investigation for Optimized Duct Design for Noise Reduction and Performance Enhancement. J. Phys.: Conf. Ser., 2784(1), 012032.

  • Sanyal, S., Shukla, A. K., et al. (2024). Pneumatically Operated Tendril-based Soft Hyper Redundant Robotic Gripper. J. Phys.: Conf. Ser., 2784(1), 012026.

  • Sanyal, S., Shukla, A. K., Pinjan, H. S., Tailor, P., Kumar, P. P., Saurav, S., & Bhargav, S. K. (2022). Biomimetic Soft Hyper-Redundant Robotic Gripper: Comprehensive Review. In International Conference on Advancements in Interdisciplinary Research (AIR-2022). MNNIT Allahabad, Prayagraj, India.

  • Kumar, A., Kumar, R., & Shukla, A. K. (2021). A Computation Study of Filtration Process with Different Pleat Shapes. In Advances in Mechanical and Systems Engineering (CAMSE 2021). NIT Jalandhar, Punjab, India.

  • Dewan, A., Dutta, R., & Shukla, A. K. (2016). Slot Jet Impingement Heat Transfer using RANS Approach and LES. In Proc. 6th International and 43rd International Conference on Fluid Mechanics and Fluid Power. MNNIT Allahabad.

 

Refereed National Conferences

  • Dewan, A., & Shukla, A. K. (2018). Challenges in Computation of Turbulent Slot Jet Impinging on a Heated Wall. In Symposium and Workshop for Analytical Youth in Applied Mechanics (SWAYAM) 2018. BITS Pilani, K.K. Birla Goa Campus.

  • Shukla, A. K., & Dewan, A. (2018). Jet Impingement Heat Transfer on Flat and Ribbed Surfaces. In Symposium and Workshop for Analytical Youth in Applied Mechanics (SWAYAM) 2018. BITS Pilani, K.K. Birla Goa Campus.

 

Other Info.

SPONSORED PROJECTS

1. Studies On Air Ventilation in Central Air-Conditioning Units in Post Covid-19 Scenario Guided by Machine Learning and Artificial Intelligence Techniques, Department of Scientific and Industrial Research (DSIR), 22.09 Lacs, Co-Principal Investigator, PI: Prof. Amit Rawal (IIT Delhi)

2. Technology Foresight Studies on Advanced Materials as The New Technology Horizons for The Industry in The Future; Studies on The Implementation of Stainless Steel Fabricated Try Additive Manufacturing and Computational Forecasting Technique for High Temperature Applications, Department of Scientific and Industrial Research (DSIR), 25.54 Lacs, Co-Principal Investigator, Co-Principal Investigator, PI: Dr. Shiva S (IIT Jammu)

3. NIT Raipur Seed Grant: Study Of Modern Industrial Air Purification and Sterilization Techniques, 4.65 Lacs, as PI.

4. Inclusive Fintech- Bridging The Gap inCommunities through Order Financingunder the Tribal Area Sub plan (TSP) scheme of IBITF, Rs 25,22,320 Lakhs. Co-Principal Investigator.

BOOKS PUBLICATION

  • Contributed additional content and problems with solutions for the development of eight chapters in book “Engineering Fluid Mechanics, 12th Edition by Donald F. Elger, Barbara A. LeBret, Clayton T. Crowe, John A. Roberson (9781119820734), Wiley International.
  • Additive Manufacturing: Basics to Applications by Shiva S (IIT Jammu) and A.K. Shukla, WILEY (Under Progress)

CONSUTANCY WORK

 1.      Technical Evaluation Work of MSP Steel And Power Ltd. Raigarh MSP Steel & Power Ltd. V+P.O.-Jamgoan, Raigarh- 496001 (C.G.) Amount : 0.885 Lac

 2.      Completed Inspection of Bifurcation Of Power Generation Through WHRB and Coal Based Boiler JSW Ispat Special Products Limited (JSSPL). Amount: 2.714 Lacs

 3.      Inspection Work on Cooling System of Cold Storage. M/S, Jagdamba Cold Storage. Amount: 0.295 Lac

 4.      Technical Evaluation and Certification Work of solar Dryer M/S, Baliram And Son`S.  Amount: 0.295 Lac

 5.      Technical Evaluation and Certification Work of solar Dryer M/S Sidhharth Enterprises Amount: 0.590 Lac

 6.      Technical Evaluation Work of Cold Storage M/S, Vinod Kumar Jain Agro Aksim (P) Ltd. Amount: 0.944 Lac

 7.      Technical Evaluation Work of Cold Storage M/S, Maruti Nandan Cold Storage. Amount: 0.944

 8.      Technical Evaluation and Certification Work of solar Dryer M/S Sidhharth Enterprises. Amount: 0.023

9.      Technical Evaluation and Certification Work of solar Dryer M/S, Baliram And Son`S. Amount: 0.023 Lac

10.  Technical Evaluation and Certification Work of Solar Dryer M/S, Batala Engineering Works Amount: 0.295 Lac

11.  Inspection Work on Cooling System of Cold Storage. Maa Sharda Cold Storage. Amount: 0.295 Lac

12.  Inspection Work on Cooling System of Cold Storage. Singhania Cold Storage. Amount: 0.295 Lac

 

INCUBATION MANAGEMENT/STARTUP ACTIVITIES

  • Worked in Digital Agri Business as a co-founder.
  • Incubation Advisor in IIEST, Incubation Federation, IEST, Building No-55, Panchkuian Marg,Opp.Metro Pillar No-6, Near-Ramakrishna Ashram Metro Station, Connaught Place, New Delhi (From 2014 to Till Date)
  • Faculty-in-Charge for Establishment of Incubation Centre at NIT Raipur
  • Member, National and Industrial Collaboration Cell, NITRR
  • Invited as a judge at Hultz Prize (Bill Clinton Global Initiative of United Nations) Sharda University for recommendation of Startups on 23rd Jan 2021.
  • Participated in Incubation Capacity Development workshop on 16th and 17th February 2023 in IIT MRP, Chennai. 
  • Intrim - Chief Executive Officer of NIT Raipur Foundation for Innovation Entrepreneurship (NITRRFIE), a Section-8 not-for-profit company of NIT Raipur, Mar 2023,

PATENTS FILED

  • Nasal Filter (Application# 202011050734)
  • Clean Air Tower (Application# 202111012973)

REVIEW ASSIGNMENT

Served as potential reviewer for flowing reputed international journals and conferences.

  • International Journal of Heat and Technology
  • International Journal of Heat and Fluid Flow
  • Sadhana
  • International Journal of Mechanical Engineering Sciences – Part C
  • Fluid Mechanics and Fluid Power (FMFP) an international conference
  • NCICE 2019 (NIT Kurukshetra)
  • ITME 2019 (KIET, Ghaziabad)

SCHOLASTIC ACHIEVEMENTS & AWARDS 

  • Awarded Research Excellence Travel Awards (RETA) of Rs. 1,50,000.00 (CIITD/PGSR/2018/No. IITD/PGSR/2018/14034, dated 07/09/2018) for 2nd semester 2017-2018, IIT Delhi based on research publications.
  • Awarded Research Scholar Travel Award (RSTA) of Rs. 1,50,000.00 during Ph.D.
  • Awarded International Travel Support (ITS) (File Number: ITS/2018/004743) by Science and Engineering Research Board, Department of Science and Technology (DST), Government of India.
  • Selected and participated in BRICS youth summit 2018 by Ministry of Youth Affairs and Sports, Government of India as an Indian delegate at Bela Bela, South Africa and delivered a speech on 4th Industrial Revolution on the behalf of India followed by a panel discussion and QA session.
  • Received a letter of appreciation from Hon’ble Governor of Nagaland (His Excellency P.B Acharya) for the organization of one-day workshop named ‘AAHVAAHN’ 19, A call of change makers’ focused on Social Entrepreneurship being the event coordinator.
  • PhD thesis nominated for best thesis award by Indian Examiner.
  • Delivered a lecture (May 23rd, 2021) on Product Management – Market Research, Product Planning & Development, Analytics under Entrepreneurship Development Program of National Productivity Council (NPC), an autonomous organization under Ministry of Commerce & Industry, Government of India.
  • Invited as a judge at Hultz Prize (Bill Clinton Global Initiative of UN) Sharda University on 23rd Jan 2021.

 

INVITED LECTURES AND MAJOR OUTREACH ACTIVITIES

 Keynote invited talk on ‘NEP2020: Role of technical Educational Institutions in making a strong, prosperous and self-reliant India’ at MNNITA Prayagraj (20th Jul 2022).

  • Invited Keynote lecture on “Modeling and Optimization Techniques in Engineering” at IES University Bhopal on 27/01/2022.
  • Delivered an Invited Talk on “Role of Make in India: Industry Academia Collaboration” in VSAM 2021, NIT Jamshedpur on 30th July 2021.
  • Delivered an invited lecture (Nov 10th, 2021) on Research Paper Writing under Entrepreneurship Development Program of National Productivity Council (NPC), an autonomous organization under Ministry of Commerce & Industry, Government of India.
  • Delivered an invited lecture (May 23rd, 2021) on Product Management – Market Research, Product Planning & Development, Analytics under Entrepreneurship Development Program of National Productivity Council (NPC), an autonomous organization under Ministry of Commerce & Industry, Government of India.
  • Session Chair in international conferences, ICFAMMT 2022 IITRAM and AMMLAC 2022 NIT Raipur
  • Expert lecture on Incubation and Startup for B.Tech Second and third-year students at  IES University Bhopal on 23 Nov 2022.

ACADEMIC PROJECT WORKS

Ph.D (Doctorate of Philosophy)

Title: “Computational investigation of flow and heat transfer characteristics of a turbulent slot jet impingement on a heated plate using LES and RANS modeling”

Supervisor: Prof. Anupam Dewan

 M.Tech (Master of Technology)

Title: “Computational analysis of enhancement of heat transfer in a square channel using attached and detached ribs “

Supervisor’s: Prof. Anupam Dewan and Prof. Sanjeev Sangh

 

WORK EXPERIENCE

No.

Organization Name

Designation

Roles and Responsibilities

1

NIT Raipur

Assistant Professor Grade II

[Jul 2021 – Till Date]

Teaching and Administration

Faculty In Change of Establishment of Incubation Cell, Member, IIC Cell NIT Raipur.

 

 Elofic Industries Limited,Faridabad, India

R&D Scientist

[Jan 2020–Jul 2021] 

 Team Management, Analysis Related to Filtration Solutions, Research Liaising, Industry Academia Collaboration, FMEA, PPAP, Product Development, Research Report Preparation, Publication and Patent Filing, Startup Acquisition

2

KIET, Ghaziabad

 

Assistant Professor (Research)

(Mech. Engg.)

[Jun 2019 to Jan 2020]

Teaching, Administration and Research Subject Taught: Heat and Mass Transfer, Engineering Graphics.

Laboratory: Heat and Mass Transfer Lab and CAEG

3

IIT Delhi

 

Research Scholar/ Teaching Assistant

(Applied Mechanics)

[Jul 2014 – Jun 2019]

Subject Assisted: Applied Computational Method, CFD, Advance Fluid Mechanics, Heat Transfer and Engineering Mechanics.

Lab: Applied Computational Method Lab, Fluid Mechanics Lab, CFD Lab.

STUDENTS PROJECT GUIDANCE

Doctor of Philosophy

1. Mr. Yagya Sahu, 2022, Area: OpenFOAM based solver development and turbulence Modelling for complex flow and heat transfer characteristics.

Master of Technology

1. Ms. Taqwa Qadri (2020-2021, Main Supervisor), Industrial Thesis, BITS Goa, Title: Computational Fluid Flow Analysis of Pleated Filters using Varying Geometric Parameters and Turbulence Models (Status: Completed, Co-Supervisor: Dr. P Ranjan, BITS Goa)

2. Mr. Abhishek Kumar, (2020-2021, Co-Supervisor), Computational Study of Flow Through Porous Media For Automotive And Clean Air Filtration Products. (Status: Completed, Main Supervisor: Dr. Rajesh Kumar, MED, NIT Kurukshetra)

3. Mr. Dinesh Babu A, (2021-2022, Main Supervisor) Title: Performance analysis of the solar flat plate collector with different phase changing material” is my own researchwork carried out under the supervision (Co- Supervisor: Dr. Vivek KumarGaba), Mechanical Engineering, National Institute of Technology Raipur, Raipur (CG),India. (Status: Completed)

4. Mr. Arunanchalam D., (2021-2022, Co-Supervisor), Title: Investigation of Flow and Thermal Properties of Combined Multiple Shell Pass Shell and Tube Heat Exchanger, (Co-Supervisor: Prof. R. Salhotra), Mechanical Engineering, National Institute of Technology Raipur, Raipur (CG),India. (Status: Completed)

5. Mr. Ashish Dewangan, (2022-2023, Main Supervisor), Area: Hybrid Thermal Analysis of Battery Thermal Management System (BTMS) of Electric Vehicle Using Battery Modelling (in CFD) (In Progress).

MAJOR INDUSTRIAL AND RESEARCH PROJECTS HANDELED

No.

Name of The Project

 Responsibilities

Status

Organization

1

Clean Air Tower

Background Research, Initial and Improved Design monitoring, Team Management Proto Development and Testing.

Completed 

Industrial form Elofic

2

Nasal Filter

Background Research, Initial and Improved Design, Team Management, 3D Print Proto Development and Testing.

Completed

Industrial form Elofic

3

Computational, Experimental Analysis of Filter Media Simulation

Concept, Research and Mathematical Formulation

---

Industrial form Elofic

4

Filters for Zero Emission and EV Filtration

Concept, Research, Mathematical Formulation and Product Development.

---

Industrial form Elofic

5

Oxygen Concentrator

Concept, Research and Product Development.

Completed

Elofic/SVSU

SOFTWARE & PROGRAMMING SKILLS

ANSYS Fluent, ICEM, Gambit, Matlab, C++, MS Office, OpenFOAM 4.1, Star CCM+, Paraview, Tecplot 360.

AREA OF INTEREST

Computational Fluid Dynamics, Fluid Mechanics, Convective Heat  transfer Analysis, RANS, LES, Design Methods, Numerical Simulation, Turbulence Modelling, Filtration and Clean Air.

INDUSTRIAL TRAINING

Organization: Railway Workshop Primary Training Centre Gorakhpur (Duration: 4 Weeks)

Organization: Larson & Tubro ECCD (Duration: 4 weeks)

RESEARCH GRANTS/AWARDS RECEIVED* 

No. 

Funding Scheme/Agency Name 

Amount (INR) 

1

Research Scholar Travel Award (RSTA)/IIT

Delhi

1,50,000.00 

2

Research Excellence Travel Awards

(RETA)/IRD IIT Delhi

1,50,000.00 

3

International Travel Support (ITS)/SERB,

DST, Government of India (ITS/2018/004743)

1,17,500.00 

 

SHORT TERM COURSES/TRAINING/WORKSHOP ATTENDED

No.

Name of The Program/Workshop

Duration

Host/Organizer

Remarks

1

Faculty Development Programme

30days

Faculty Development Institute (SGI, Agra, Mathura Campus)

Awarded Grade ‘A’

2

Human Values and Professional Ethics

3 Days

Gautam Buddha Technical University, Lucknow

Participation Certificate

3

A Talent Edge: Industry Institute Interface

12th Nov’ 2011

HCST, Mathura

Participation Certificate

4

Turbulence in Environmental Flows

29th Oct – 3rd Nov’ 2017

Global Initiative of Academic Networks (GIAN)

Participation Certificate

5

Innovative Teaching & Learning Pedagogy

4th – 6th Jul’ 2019

KIET, Ghaziabad

Participation Certificate

EXTRA CURRICULAR ACTIVITIES 

  • Participated in the IEEE sponsored national seminar on Non-Conventional Energy Resources & it’s Utilization (NCERU, 2009) organized by the Department of Electrical Engineering, KNIT, Sultanpur (UP)-INDIA.
  • Completed a seminar work on titled ‘Air powered car’ during 6th semester of B.Tech.
  • Participated in ‘Indo Japan Seminar on Nanomaterials for Technology Development’ (IJSNTD 2010) at HCST Mathura on 28th Oct. 2010.
  • Worked on SERB (DST) project titled “Large Eddy Simulation of Turbulent Slot Jet Impingement Heat Transfer” (SR/S3/MERC/0114/2012) at IIT Delhi during my Ph.D. research from July 2012 to Jun 2017.
  • Presented a research poster titled “Computational analysis of enhancement of heat transfer in a square channel using attached   and detached ribs" in IIT Delhi Open House 19th April 2014.
  • Departmental coordinator of IIT Delhi Open House 19th April 2014.
  • Departmental coordinator of IIT Delhi Open House 2015.
  • Advisory Council Member of IIEST (Industrial Incubation of Entrepreneurship and Skill Training Federation) Delhi Dwarika (July 2014 to 2018).
  • Cricket and Chess tournament coordinator and member of Applied Mechanics Society, IIT Delhi during 2013 - 2014.
  • Elected as Secretary Applied Mechanics Society (AMS) of Department of Applied Mechanics, IIT Delhi 2015-2015.
  • Coordinated/volunteered in organizing team of INCAM (Indian National Conference on Applied Mechanics) 2015 organized by Department of Applied Mechanics, IIT Delhi.
  • Coordinator and member of winning team of Applied Mechanics Cricket League 2016, IIT Delhi.
  • Participated and coordinated various activities at India International Science Festival (IISF) 4-8th Dec 2015 at IIT Delhi organized by VIBHA and DST, India.
  • Elected as SAC (Student Affair Council) convener/representative IIT Delhi for MRS-Type A for the session 2016-2017.
  • Nominated member (SAC) in Hospital Advisory Committee (HAC) IIT Delhi for 2016-2017.
  • Elected as SAC (Student Affair Council) convener/representative IIT Delhi for MRS-Nalanda/IP for the session 2017-2018.
  • Advisor R&D Eolic Industries Limited (From 2022 to Till Date).

INTERNATIONAL VISITS

South Africa, United States of America (Twice) (B1/B2 visa for 10 years) and South Korea