Neigapula  Venkata Swamy Naidu

Department Mechanical Engineering
Designation Associate Professor
Educational Qualification B.E (Mech. Engg.), M.E (Machine Design), Ph.D (Composite Structures), IIT-Kharagpur
E-Mail nvsnaidu.mech@nitrr.ac.in
Contact Number 9963390988
Areas of Interest

Bio-Mechanics, Nano-Composite Structures, Functionally Graded Materials, Solid Mechanics and FEM

Publications

(a) International Journals:

  1. N.V. Swamy Naidu, K. Durga Rao, M. Manzoor Hussain, T.V. Karthikeyan, “Large deflections of buckled compound cantilever columns under linearly varying load by using galerkin finite element formulation”, Journal of Aerospace Sciences & Technologies, 70(4): 1-12,2018 (Scopus/Web of Science).
  2. R. Srinivasa Raju, G. Aruna, N. Swamy Naidu, S. V. K. Varma, and M. M. Rashidi, “Chemically reacting fluid flow induced by an exponentially accelerated infinite vertical plate in a magnetic field and variable temperature via LTT and FEM”, Theoretical and Applied Mechanics, 43(1): 49–83, 2016 (Scopus/Web of science).
  3. N.V.Swamy Naidu and B.Sateesh, “Improved bilinear degenerated shell element”, International Journal of Computational Methods, 12(2), 1550004:1-22, 2015 (Scopus/Web of science).
  4. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Free Vibration Analysis of Laminated Composite Shells in Hygrothermal Environments”, Composite Structures, 77(4): 475-483, 2007, (SCI-Impact Factor: 4.101).
  5. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Transient Analysis of Laminated Composite Shells in Hygrothermal Environments”, Composite Structures, 72(3): 280-288, 2006, (SCI-Impact Factor: 4.101).
  6. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Impact Behaviour of Laminated Composite Shells in Hygrothermal Environments”, International Journal of Crashworthiness, 10(4): 389-402, 2005, (SCI-Impact Factor: 1.053).
  7. N.V.S.Naidu and P.K.Sinha, “Nonlinear Finite Element Analysis of Laminated Composite Shells in Hygrothermal Environments”, Composite Structures, 69(4): 387-395, 2005, (SCI-Impact Factor: 4.101).

(b) International Conferences:

  1. Sriram Bharath, N.V. Swamy Naidu, “Structural Analysis of Functionally Graded Material Shells using Finite Element Method”, International Conference on Composite Materials and Structures (ICCMS 2017), IIT-Hyderabad, December 27-29, 2017.
  2. Sriram Bharath, N.V. Swamy Naidu, “Structural Analysis of Aileron Panel using Finite Element Method”, International Conference {i-CAM2k16} on “Recent Innovations in Civil & Mechanical Engineering”, CMR Technical Campus, Hyderabad, India, December 10-11, 2016.
  3. N. Uday Ranjan Goud, N.V. Swamy Naidu, “Investigation on Buckling of Laminated Composite Plate”, International Conference {i-CAM2k16} on “Recent Innovations in Civil & Mechanical Engineering”, CMR Technical Campus, Hyderabad, India, December 10-11, 2016.
  4. K.Durga Rao and N. V. Swamy Naidu, “Thermal Post-Buckling of Compound Circular Plate: A Simple Finite Element Formulation”, International Conference on Computer Aided Engineering (CAE-2015), GITAM University, School of Technology, Hyderabad, India, December 10-12, 2015.
  5. Srinivasa Raju R, Jitender Reddy G, Anil Kumar M, N.V. Swamy Naidu, "Finite Element Analysis of Chemically Reacted Fluid Flow Over an Exponentially Accelerated Vertical Plate", International Conference on Computer Aided Engineering (CAE-2015), GITAM University, School of Technology, Hyderabad, India, December 10-12, 2015.
  6. B.N.DhanunjayaRao, B.Sateesh and N.V. Swamy Naidu, “Design Optimization of an Alloy Wheel for Vehicular Application”, Proceedings of International Conference on Theoretical,  Applied, Computational and Experimental Mechanics (ICTACEM 2014), IIT-Kharagpur, December 29-31, 2014.
  7. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Impact Response of Doubly Curved Composite Shells in Hygrothermal Environments”, International Conference on Computational & Experimental Engineering and Sciences (ICCES-05), IIT Madras, Chennai, December 1-6, 2005.
  8. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Transient Analysis of Doubly Curved Laminated Composite Shells”, Paper No. 220, CD Proceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM-2004), IIT-Kharagpur, 28-30th December 2004.
  9. N.V.S.Naidu and P.K.Sinha, “Nonlinear Finite Element Analysis of Laminated Composite Thick Shallow Shells under Hygrothermal Load”, Paper No. ICASI/DA-C30, CD Proceedings of International Conference on Advances and Structural Integrity (ICASI–2004), Indian Institute of Science, Bangalore, 14-17th July 2004.

(c) National Conferences:

  1. Ravi Teja R, Nikhila Prasad G, N.V.S.Naidu and Dwivedi Y.D, “Mechanical characterization of Glass Fibre Reinforced epoxy impregnated with Nano silicon dioxide”, Proceedings of the National conference on Advances in Mechanical and Material Science (AMMS-2015), November 28, 2015, Vishnu Institute of Technology, Bhimavaram, AP, India.
  2. N.V.Swamy Naidu and B. Sateesh, “Membrane and bending behavior of improved degenerated shell element”, National Conference on Recent Advances in Mechanical Engineering (NCRAME’14), March 22, 2014, JNTUK-UCE, Vizianagaram, AP, India. 
  3. N.V.Swamy Naidu, B. Sateesh and Ch. Srinivasa Rao,” Development of Degenerated Shell Element”  National Conference on Advances in Mechanical Engineering, NCAME13, April 05-06, 2013, Vignan University, Guntur, INDIA.
  4. N.V.Swamy Naidu and Ch.Harish, “Static and Dynamic Behaviour of
    Improved Bilinear Degenerated Shell Element”, National Conference
    on Applicable Mathematics in Wave Mechanics and Vibrations (WMVC -
    2010),
    Kakatiya University, Warangal, A.P., March 13-15, 2010.
  5. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Dynamic Response of Laminated Composite Shell Panels in Hygrothermal Environments”, National Conference on Composite Component Construction, JNTU College of Engineering, Kakinada, A.P., September 12-13, 2005.
  6. N.V.Swamy Naidu and P.K.Sinha, “Nonlinear Free Vibration Response of Doubly Curved Laminated Composite Shells in Hygrothermal Environments”, National Conference on Composite Component Construction, JNTU College of Engineering, Kakinada, A.P., September 12-13, 2005.
  7. N.V.S.Naidu and P.K.Sinha, “Hygrothermal Effects On The Geometrically Nonlinear Behaviour of Laminated Composite Shallow Shells”, Proceedings of the National Conference on Design, Simulation & Modeling of Mechanical Systems, JNTUC, Kakinada, 143 – 146, 7-8th May 2004.
Other Info.

(a) Guest Lectures: 

  1. As an expert talk on “Nanocomposite Applications in Aerospace Structures” on 14 September 2018 at Malla Reddy College of Engineering & Technology, Hyderabad.
  2. As a resource person for Faculty Development Program on “Recent Developments of Nanocomposite Materials in Aerospace Industries” on 25 Apr 2018 at Malla Reddy College of Engineering & Technology, Hyderabad.
  3. As a resource person for a 3 day national work shop on “Advanced Vibration Analysis-MATLAB Hands on sessions” during 3-5 March 2016 at Department of Mechanical Engineering, University College of Engineering, JNTUK-Kakinada, AP, India.
  4. As a resource person for “Two day Workshop on Finite Element Analysis” on 11-12 February 2015 organizing by Vardhaman College of Engineering, Hyderabad.
  5. As a resource person for “Two day Workshop on Finite Element Method and its Applications” on 2-3 January 2015 organizing by Vishnu Institute of Technology, Bhimavaram.
  6. As a resource person on Composite structures for the Faculty Development Programme on “Analysis of Composite Materials” held on 5th December, 2013 at MLRIT, Hyderabad.
  7. As an expert talk on Aerospace Structures advances for the Workshop on “Composite Application in Advanced Aircraft Structures” held on 24th September, 2013 at Malla Reddy College of Engineering & Technology.
  8. As a resource person on Aerospace Structures for the Faculty Development Programme on “Aerospace Vehicle Structures their Simulation” held on 28/06/2013 & 29/06/2013 at MLRIT &M.
  9. As an expert talk on Aerospace Structures advances for the Workshop on “Composite Application Challenge in Primary Aircraft Structures” held on 27-29, December, 2012 at MRCET, Hyderabad.

(b) Other Academic Contribution:

  1. Session chair for the “International Conference on Emerging Technologies in Mechanical Sciences-2014” held on 26-27 December 2014 at Mallareddy College of Engineering, Hyderabad.
  2. Member of Board of Studies in Department of Aeronautical Engineering at Vardhaman College of Engineering (Autonomous) for a period of 3 years since April 1, 2014.
  3. Chairman of Board of Studies in Department of Aeronautical Engineering at GITAM University since April 22, 2013.
  4. Co-chairing the session for the Department of Aeronautical Engineering at the “2nd World Conference on Applied Sciences, Engineering and Technology” held on 8-9 March 2013 at GITAM University, Hyderabad.

WORKSHOP/TRAINING PROGRAMS ATTENDED:

  1. Two days workshop on “MATLAB Simulation” organized by Department of civil engineering, School of Technology, GITAM Deemed to be University, Hyderabad, during February 22-23, 2018.
  2. One week Short Term Program on “Formulation Development of Nano Particles”, conducted by Human Resource Development Centre, University of Hyderabad, Hyderabad, during March 20 - 25, 2017.
  3. Two week short term training programme (STTP) on “Introduction to Structural Engineering”, conducted by Indian Institute of Technology, Kharagpur, during 30th November 2015 to 3rd January 2016 and 4th January to 9th January 2016, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  4. Two week short term training programme (STTP) on “Technical Communication”, conducted by Indian Institute of Technology, Bombay, during 08th October to 11th November and 30th November to 5th December 2015, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  5. Two week short term training programme (STTP) on “Pedagogy for effective use of ICT in Engineering Education”, conducted by Indian Institute of Technology, Bombay during 05th to 7th and 19th to 21st January 2015, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  6. One week short course on “Non linear Finite Element Method” (NLFEM 2014) held on 16-19 December, 2014 at IIT Hyderabad.
  7. Two week ISTE workshop on “Computer Programming” from May 20th, 2014 to June 21st, 2014, conducted by Indian Institute of Technology, Bombay, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  8. As a workshop coordinator for Two week ISTE main workshop on “Fluid Mechanics” during May 20-30, 2014, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  9. Two week ISTE main workshop on “Signals & Systems” during January 2-12, 2014, conducted by Indian Institute of Technology, Kharagpur, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  10. One week coordinators' workshop on “Fluid Mechanics” during March 11-15, 2014, organized by National Mission on Education through ICT (MHRD, Govt. of India), IIT-Kharagpur.
  11. Two week ISTE workshop on “Engineering Mechanics” during 26th November to 6th December, 2013, organized by National Mission on Education through ICT (MHRD, Govt. of India), GITAM University, Hyderabad.
  12. Certification course on “Aircraft Structures Design and Analysis” of Boeing Commercial Airplanes by Michael Mohaghegh (Boeing Technical Fellow Payloads and Structures Engineering, USA) during August 13-24, 2007 at Infotech Enterprises Limited, Hyderabad.
  13. Introductory course on “Introduction to Scripting in ABAQUS” during November 7-10, 2006, organized by ABAQUS Engineering Analysis Solutions (P) Ltd at Bangalore.
  14. AICTE short-term course on “Finite Element Methods on Mechanical Systems Design” during July 1-13, 2002 at Indian Institute of Technology, Kharagpur.
  15. A Workshop on “FEM in CAD Systems” organized by CAM Technologies, Visakhapatnam, during 16 – 20, January 2002.
  16. A course on “Finite Element Method On Computer Aided Design Systems” during February 7–9, 2001, conducted by College of Engineering, Marine Dept., Andhra University, Visakhapatnam.
  17. A Workshop on “Production Drawing for Mechanical Engineers”, during September 6-8, 2001, organized by Mechanical Engineering Department, G.V.P. College of Engineering, Visakhapatnam, AP.
  18. ISTE sponsored summer programme “Finite Element Method and Its Application” during May 14-28, 2000, organized by CBIT, Hyderabad.

MAJOR PROJECTS EXECUTED AT PREVIOUS INDUSTRIES:

  1. A400M Tailing Edge Details (TED) and Spar check stress, Infotech Enterprises Ltd, Hyderabad.
  2. Structural substantiation for sizing of the Front Spar Bulkhead Lower Chord detail part, Splice and Joint to Fuselage Skin and Over wing fairing clip interface joint analysis of Boeing 787-9 aircraft, Boeing, Everett-WA, USA.
  3. Durability and Damage Tolerance analysis of wing and empennage of Boeing Aircraft, Infotech Enterprises Ltd, Hyderabad.
  4. Design optimization of PI-Fitting, T-Clip and Flex Tee assembly at Wing to body joint of Boeing 787-9 Aircraft, Infotech Enterprises Ltd, Hyderabad.
  5. FE Modeling and Analysis of Aircraft Interiors, Infotech Enterprises Ltd, Hyderabad.
  6. A380 fuselage S19 Concessions and A320 HTP MRB concessions, Infotech Enterprises Ltd, Hyderabad.
  7. Design and Analysis of Fixed Leading Edge (FLE), Fixed Trailing Edge (FTE) and Aileron of G-VI Aircraft, Infotech Enterprises Ltd, Hyderabad.
  8. Development of Four Noded Quadrilateral Shell Element Insensitive to Distortion for FEAST Software, Cades Digitech Pvt Ltd, Bangalore.
  9. Development of a Customized User Interface in ABAQUS CAE to Automate the Design Process for Piston Rings, Cades Digitech Pvt Ltd, Bangalore.
  10. Non-Linear Finite Element Analysis of Laminated Composite Shells in Hygrothermal Environments (Part of Ph.D Programme) , IIT-Kharagpur.
  11. Stress Analysis of Composite Wing-joints for ARDB, IIT-Kharagpur.

MEMBERSHIP IN PROFESSIONAL BODIES:

  1. Life member of Indian society of technical education (ISTE) MISTE-LM 30804.
  2. Life member of the Indian Science Congress Association - L31265.
  3. Life member of Aeronautical Society of India (AeSI) - M-20236.